Super Bright 48/46 LED 1100 Lumen Wireless Water Proof Solar Lights Outdoor Radar Motion Sensor Lights Aluminum Housing for Outdoor Security Yard Patio Fence Path Driveway Garage Porch Wall Lights

Feature:

【Aluminum Alloy Housing Solar Lights】Different from other solar lamps with plastic housing. Lightweight but strong. Sandblasted and anodized metal housing,anti-oxidation and corrosion resistance. It can be used for many years even in extreme weather or harsh outdoor environments and maintain its performance. The lampshade is made of engineering plastic PC material, which is heat-resistant, anti-ultraviolet, and anti-yellowing.

【High Efficient Solar Panel】PET solar panel with a larger lighting area, it can absorb sunlight faster, so that it can be recharged faster. Charging for 8 hours, can be illuminated for more than 12 hours.

【High-END LED For Bright Outdoor Lighting】48/46 LED 2835 high-end LED beads, 6000k white color temperature appears brighter, and it can reach 900 lumens in bright mode. The lampshade surface is curved by a large angle. The structure is designed to diffuse the light outwards, which has the characteristics of large-area illumination.

【Microwave Radar Induction & Dawn To Dusk Lighting】Radar motion sensor is a detector that combines microwave receiving and transmitting equipment. The working principle is based on the Doppler effect. The microwave wavelength is very short, between 1mm and 1000mm, so it is easily reflected by objects.The sensing angle is greater than 180°, and the farthest sensing distance can reach 32 feet.Ultra-long runtime on always on mode,up to 12H for dusk to dawn lighting.

【Four Working Modes & Waterproof】Four working modes meet all your requirements for lighting.Mode:Faint light to strong light ;No light to strong light;Always lighting;Emergency lighting.You can set the mode arbitrarily.Waterproof,suitable for any outdoor scene: Garage, aisle, porch, patio, garden, deck, camping, yard, farm, fence, wall, etc.

Product Information:

Product Name: Aluminum triangle Solar Lights
Solar panels Specifications: 5.5V 3.2W polysilicon
Battery: Lithium iron phosphate battery 3.2V 3000mah battery with charge and discharge protection board
Battery protection voltage: 2.65-3.75V
Battery Life: 2000 times charge cycles
LED quantity: 30 lumens 0.5 watt LED * 48 pcs/46 pcs（Infrar Sensor 46LED）
Luminous flux: 800lm luminous flux up to full power
Housing material: PC + UV UV component
Sensing modes: Microwave sensor
Microwave power: 10.8G 2 mW
Sensing distance: 5-10 meters
Lighting modes: light control + strong lights when people nearby, micro-light when people leave,
Mode Delay time: 15 seconds
Lighting duration: can induction more than 500 times when full charged (15 seconds each)
Charging time: 8 hours full sun off
Waterproof grade: IP65
weight:630g
size:230*103*83mm

How to use:

Power on:press and hold the switch for 5-10 seconds to start the first mode.
4 Modes Features: each press of a button will replace a light mode,switch circularly.
The modes are as follows:
1 - Dim, full bright when motion detected
2 - Off, full bright when motion detected
3 - Medium all night, no motion detection
4 - Manual - full bright for 30 minutes
Solar outdoor lights to brighten your home
How to start the solar light and switch between the four modes?
1.Long press 5s to start, then turn on the low light to strong light sensor mode:

Radar Motion Sensor and 4 Working Modes

Radar Sensor - Microwave radar motion detector is a hi-tech induction technology based on Doppler principle with 360° wide angle detection which can detect moving objects easily from all the directions up to 30 feet. Radar sensor works well in extreme weather condition and installed inside the light BUT please make sure it was installed far away from any other lighting source or electrical products to avoid electromagnetic interference.
MODE 1 - Dimmable & Bright Mode: Light stays in dimmable but becomes very bright for 15 seconds when motion is detected. Light continues very bright if motion is being detected all the time.
MODE 2 -Off & Bright mode: Light is off but becomes very bright for 15 seconds when motion is detected. Light stays very bright if motion keeps being detected all the time.
MODE 3 -Constant lighting mode: Light stays on constantly with dim brightness all the time during the night, no motion sensor function.
MODE 4 -Emergency mode: Light stays very bright for 30 minutes and then turns off. When solar panel senses light, emergency mode starts over for another 30 minutes, no motion sensor function.

There are 4 different modes following this sequence: Dimmable-Bright, Off-Bright, Constant Lighting, Emergency Lighting and then Power Off. You can cycle through them by just pushing the button shortly each time

Package Include:

1 48 LED Solar Motion Sensor Light;
2 Expansion Pillar-hinge
2 Installing Screws;
1 Positioning Card;
1 Instructions

Turn on the solar Lights

Make sure to charge the lights 6 hours before use.
Please be noted that lights must be mounted vertically with the light portion down to avoid water damage
Please have the solar panel fully exposed directly to sunlight, especially in the winter or rainy and cloudy days
Please turn on the light in a completely dark environment or cover the solar panel during daytime
The On/Off switch is on the LED Cover. Push and hold the button for 5 seconds to turn on the light and to set it to first mode Dimmable-Bright Mode (recommended)
Lighting up Your Road Home
If you install 2 lights in same location put them 10’ apart and make it far away from other lighting source and electrical products to avoid electromagnetic wave interference.
Recommended height is 10 ~ 16ft above ground level